Amps & Effects

• Vintage Echoplex EP-3 tape echo warmth and modulation
• Audiophile quality audio paths
• 100% analog dry path
• Studio-grade low noise floor
• Age control varies delay tone from pristine to dark and dirty
• Delay control provides 65–750ms of delay time
• Tap jack provides up to 4 seconds of delay time with external Tap Tempo Switch
• The Echoplex Delay requires 9 volts (240mA) and can be powered by the included Dunlop ECB003/ECB003EU adapter or the Iso-Brick ™ Power Supply. This pedal cannot be powered by a battery.
• To combine the EP103 with the EP101 Echoplex Preamp for the full Echoplex EP-3 experience, simply run the EP101 in front of the EP103

Learn More

The AH150 multi-input combo features 5 channels, 5-band graphic master EQ and Digital Delay. 150W RMS power is coupled to a 12” woofer plus tweeter.

The principle behind the Audiohub range is simple: ALL INSTRUMENTS WELCOME!

Audiohub combos deliver optimum performance, flexibility and sound quality for a wide array of audio inputs: Keyboards, e-drums, mics, acoustic and electric instruments and playback are all at home with an Audiohub combo. Learn More

• Studio-quality noise reduction
• Loop connections for easy integration
• Cutting-edge technology for precise noise removal
• Single knob for easy adjustment

Learn More

• Four effect modes in one stompbox: Harmony, Pitch Shifter, Detune, and S-BEND (Super Bend)
• Easily create two- or three-voice harmonies with selectable key and voicing
• High-quality pitch shifting
• Three-voice Detune capability
• Super Bend provides up to four octaves of extreme pitch bending
• Control pitch via expression pedal (optional BOSS FV-500L/H or Roland EV-5)
• BOSS five-year warranty

Learn More

The Getaway Driver is an amp-in-a-box type pedal with just three dials - Volume, Bite (tone) and Gain. While the pedal adds its vintage vibe on all amplifiers, it really excels when used with the amplifier's clean channel, even ones with a bright cap. It also makes a great clean boost, with low Gain and high Volume pushing amps over the edge into classic overdrive.

Learn More

Although small, this amp has an all-tube preamp and power amp to authentically produce the much loved tones of the iconic larger models on which it is based, albeit at lower power levels. The major advantage is the sheer (or lack of) size and weight.

Forging the sound of aggression for more than two decades, the Peavey 6505 series of amps produce the devastating overdriven tones that modern players demand. Peavey proudly introduces the 6505 MH, as a part of its 'micro-head' series. Although all are inherently versatile, each of the models feature very different preamp voicings and gain structures. We are confident that everyone from a country picker to a metal shredder will find at least one of these will work for them.

There are numerous features, several that are unique to Peavey, that are described in more detail in the manual. In summary:
All models have two channels that follow the same gain structure and voicing of the larger amps on which they are based, as well as a boost function that has been designed for the specific model. The channels share EQ, lush reverb and an effects loop. Channels, boost, effects loop and reverb are all footswitchable. The back panel of the 6505 MH is full of modern technology, including Peavey's exclusive Microphone Simulated Direct Interface (MSDI) with XLR output, USB recording output, headphone output, speaker defeat switch, plus a built-in 3 position power attenuator! T.S.I. tube monitoring constantly lets you know that your power tubes are in good shape, and if not, which ones need to be replaced.

The 6505 MH exhibits a tremendous amount of versatility in a small package; it features real tube tone, real tube power! It contains no simulations, emulations or approximations. Before you begin playing through your amplifier, it is very important to ensure that the product has the proper AC line voltage supplied. This is shown on the voltage selector switch near the IEC inlet on the rear panel of the unit.

Learn More

With the price of vintage HOT TUBES soaring, countless guitarists have requested that we re-issue our 1970s CMOS HOT TUBES. We've done this using the exact same design and miniaturized it, too!
Volume and Overdrive let you go from a gentle rasp that caresses your notes to a full-blown gain monster with a powerhouse punch. Sculpt your sound with the Tone control, or take a detour around the tone circuit with the Tone On/Off switch. True bypass for a pristine signal chain. Learn More

Guitarists are familiar with the tube amp stacks that sound amazing when turned up loud on a big stage, and with combo amps that are a perfect fit for smaller venues and rehearsal. THR ignored the convention that a practice amp should simply be a smaller version of a larger amplifier, creating a new “third amp” category designed around what players need when they’re playing at home. Learn More

• Tuning Range: A0(27.50Hz) - C8(4186Hz)
• Calibration: 435 - 445 Hz
• Drop tune: Flat 4 semitones
• Power Supply: External DC 9 Volt AC Adapter

Learn More

The Two Stroke Boost EQ is our take on the essential ‘clean boost’ pedal, but with even more versatility. Combining an active dual-parametric EQ and up to 12dB of output boost, the Two Stroke is the perfect tool for fine-tuning your sound or pushing your amp’s front end with unsurpassed control. Subtle Two Stroke tweaks can add an extra dimension to solos, whilst more aggressive use of the pedal’s EQ can sculpt entirely new sounds. Use the Two Stroke to add an extra channel to your amplifier or re-voice your guitar’s pickups completely. Crank the high mids to jump through the mix, cut the low end to remove the woolliness that normally occurs with traditional boost pedals, or leave the EQ flat to hear more of what you already like.

Learn More

A natural overdrive and clean boost for the tone conscious player to enhance the original sound of an instrument and amp while retaining their essential character.
Its gain stage, treble control and signal path are optimized for bass guitar and guitarists wanting extended low frequency response. An adjustable clean blend assures an articulate, full tone while boosted power rails deliver extended headroom. Learn More

• The ES-8 scratches all the itchy points of today's discriminating artists which no other switching system has yet been able to reach.
• Programmable switching system with eight loops (plus an additional loop)
• Analog circuit design to protect your pure tone
• Unprecedented routing flexibility with the ability to change the routing order and create parallel effect chains
• Onboard memory for storing external control parameters such as delay time for each patch
• Buffers can be turned on/off individually each for input and output and stored in each patch; level variability for output buffer
• Highly-reliable footswitches with switch-noise mute capability
• LCD and 7-segment LED display show detailed information at a glance
• 800 patch memories provide unmatched capability for touring musicians
• Completely customizable pedal function assignments
• Scratching the itch of serious working musicians with detailed attention to often-requested features and functions

Learn More

Cab Sim and IR Loader with 25 Built-in IR, 12 Official Celestion Cab Models, 99 IR Slots, A/B Mode and Support for IR up to 200ms

IMPULSE is our first IR Loader. As always, we aim to give you guitar tools that support your playing rather than a degree in tech manuals. In short, it’s a Cab Sim and IR Loader, and just like we made tuning a breeze with POLYTUNE and looping simple with DITTO LOOPER, IMPULSE IR LOADER will make the complexity of working with impulse response files disappear. Simply drag and drop your IRs over USB or use the dedicated IR organizer for PC and Mac, then IMPULSE IR LOADER will take care of the rest and make you sound like the best.

Learn More

The Catalyst® family includes three dual-channel combo amplifiers that perform like traditional guitar amps—while providing the increased versatility of modern amplifiers. From the 200-watt Catalyst 200, capable of holding its own on nearly any stage, to the 60-watt Catalyst 60, which is perfect for practice, recording, and performing in small venues—there’s a Catalyst amp for every player.

Catalyst amplifiers offer six Original Amp Designs—ranging from pristine clean to modern high-gain—crafted using the renowned HX® sound design techniques to ensure exceptional tone and feel. These powerful and sturdily constructed combos are equally suited for stage or studio use, and feature an XLR line output and a 4-channel USB recording interface. Also included are Boost circuits customised for each amp type, a dedicated Reverb section with six reverb types, 18 additional effects, an effects loop, a Power Amp input for using Catalyst as a powered speaker, MIDI capabilities, and power attenuation options for playing at any volume.

Learn More