Microphones

PROFESSIONAL DYNAMIC VOCAL MICROPHONE

Designed, machined, assembled, and tested by Audix in the USA, the OM11 vocal dynamic microphone was first issued in 1985 as the OM1. This microphone is a dynamic vocal microphone used for a wide variety of stage, studio, and broadcast applications. Its sharp, crisp vocal sound, resistance to feedback, and ability to handle high SPLs without distortion are trademarks of the OM11.

The OM11 dynamic vocal microphone is designed with a tight, uniformly controlled Hypercardioid polar pattern which helps isolate the vocals on stage. The response of the OM11 is tailored to cut through the mix, providing extra presence and articulation to the vocals even at very high stage volumes. In addition to having extremely low handling noise, the OM11 Hypercardioid microphone is well balanced, comfortable to hold, and durable.

Learn More

Slim Rigid 5mm EVA Rubber Foam Design with Holds Most Common Sized Half-Rack Wireless Units

Learn More

OMX-M DYNAMIC VOCAL MICROPHONE "TIGHT"

- Dynamic Vocal Microphone with a robust all metal construction
- Ideal for singers with close mic technique
- Tailored midrange response enhances vocals
- Identification ring and flat grille for intuitive positioning
- Designed and Crafted in the USA

Learn More

With rock-solid build quality and a high-power neodymium capsule, the RØDE M1 live dynamic microphone is designed to provide the very best performance, night after night. Its durability is backed-up by a lifetime warranty, following registration of purchase.

Learn More

MULTI-PURPOSE VOCAL AND INSTRUMENT DYNAMIC VOCAL MICROPHONE

The OM3S is a vocal dynamic microphone used for a wide variety of stage, home, and studio applications. This microphone has clear and accurate sound reproduction, resistance to feedback, and the ability to handle very high SPLs without distortion.

The OM3S dynamic vocal microphone utilizes a tight, uniform pattern which helps isolate vocals from the instruments on stage. With a Wide Frequency range of 50 Hz – 18 kHz, the OM3 employs a VLM™ diaphragm for a clear, precise sound with exceptional voice response.

Designed with slight bass proximity and a tailored mid-range, the OM3 Hypercardioid microphone has a full-bodied sound on small to mid-sized PA systems while retaining true sound on large or professional PA systems.

Learn More

Achieves optimum performance and accurate reproduction of almost any type of sound. Its exemplary combination of features make it ideal for the most exacting reproduction applications including: digital sampling, studio or location recording, instrumental pick-up. One of its best uses is for hi-hat and overhead cymbals. Learn More

ALL-PURPOSE PROFESSIONAL DYNAMIC INSTRUMENT MICROPHONE

Designed with a Cardioid pickup pattern for isolation and feedback control, the i5 all-purpose dynamic instrument microphone is equipped with a VLM™ diaphragm for natural, accurate sound reproduction. The i5 is used for stage, studio, and broadcast applications and is able to handle SPLs in excess of 140 dB without distortion.

The i5 Cardioid microphone can be used to microphone a wide variety of musical instruments, guitars, and bass cabinets as well as vocals and speech. The i5 instrument microphone is sturdy, compact, and easy to position. With a Wide Frequency response of 50 Hz – 16 kHz, the i5 provides clear sound reproduction without having to rely on EQ.

Learn More

M1280 Shotgun

The M1280B, a Miniaturized condenser microphone with a fully integrated preamp and detachable cable, has complete immunity from RF interference caused by cell phones and GSM devices. The M1280B condenser microphone is equipped with a Cardioid capsule and is also available with Hypercardioid, Omnidirectional, or Shotgun capsules. The M1280B has a very Wide Frequency response and may be used in a wide variety of stage, studio, and broadcast applications.

The M1280B Miniaturized condenser microphone is available with a wide array of clips and accessories allowing the microphone to be used for drums, percussion, musical instruments, overhead stage miking, podiums, conferences, and presentations.

Learn More

• XLR gooseneck for direct microphone attachment
• XLR mic cable input at the bottom end of the tube
• Heavy cast iron base for excellent stability

Learn More

7-PIECE FUSION DRUM MICROPHONE PACKAGE – AFFORDABLE EXCELLENCE

The FP7 Drum Pack contains a combination of f2, f5, and f6 dynamic microphones and the f9 condenser for overheads. The f5 is tuned for snare drum and can be used as well for bongos, timbales, guitar cabinets, and acoustic instruments; the f2 dynamic microphone is ideally suited for rack and floor toms, congas, djembe, bongos, timbales, brass, and woodwind instruments. The f6, with its extended bass response, is designed for kick drum, bass cabinets, cajon, and other low-frequency instruments. The f9 condenser microphone is intended for cymbals and hi-hat.

Built to withstand the rigors of live stage applications, the Fusion Series microphones are also excellent for rehearsal, school, House of Worship, and a wide variety of home recording applications.

Learn More

PROFESSIONAL ELECTRET CONDENSER MICROPHONE WITH PAD AND ROLL-OFF

The ADX51 is a professional pre-polarized condenser microphone used for stage, studio, and broadcast applications. The ADX51 is known for its clear, accurate response and flexibility to handle close or distance miking for a wide variety of acoustic instruments.

Characterized with a uniformly controlled Cardioid polar pattern, the ADX51 condenser microphone is designed to capture the acoustics of the instrument being miked while at the same time isolating it from the rest of the instruments on stage. With a Wide Frequency range of 40 Hz – 18 kHz, the ADX51 features a 14 mm gold vapor diaphragm and a -10 dB pad and bass roll-off filter at 150 Hz.

The ADX51 Cardioid studio condenser microphone is very easy to position, durable, and manufactured to high standards and tight tolerances. The ADX51 has a precision machined brass body, durable Black E-coat finish, steel mesh grill, and gold plated XLR connector.

Learn More

Durable 600-Denier Nylon Construction with Designed to Hold 12 Microphones

Learn More

PROFESSIONAL DYNAMIC VOCAL MICROPHONE

The OM5 vocal dynamic microphone is made with an extremely tight and uniformly controlled Hypercardioid polar pattern which isolates the vocals from the rest of the instruments on stage or in a studio.

Used on stage, in studios and for broadcast applications, the OM5 Hypercardioid microphone has a reputation for clarity, resistance to feedback, and the ability to handle SPLs in excess of 144 dB without distortion.

The OM5 dynamic vocal microphone is naturally attenuated at 120 Hz to reduce boominess and handling noise. The mid-range is tailored to provide an extra presence in the vocals allowing the vocalist to be easily heard through the main speakers as well as the monitors.

15 Foam Padded Microphone Drops with Large Storage Space for Accessories

Learn More