D.I.

The Hosa SideKick DIB-445 is a high-quality, value-priced active direct (DI) box for instrument signal routing in professional live sound and studio recording. As an active DI, the SideKick DIB-445 is perfect for environments that require longer cable runs without introducing noise and interference. Its smart design and superior components also make it a great choice for clean, hum-free recording for DAW systems.

• Balancing and impedance matching for guitar, bass, keyboards & synthesizers
• Eliminates ground loop hum thanks to galvanic transformer isolation
• 4 independent DI boxes in a solid 19" housing (1U)
• Extremely fail-safe, no power supply required
• THRU-output for passing the input signal
• Audio over Cat output (AES72 Type 5e) for forwarding all signals via a single Cat cable
• Pure and unaltered low-noise audio
• Handles even high-level inputs without distortion thanks to switchable -30dB pad
• Ground-lift switch for each output
• Engineered in Germany

• Active 2-channel DI box with premium balancing transformers
• 10–40 kHz frequency response, high dynamic response
• -30 dB input attenuation, switchable
• Ground lift switch for each output
• Balanced mono summed output
• Can be powered with 9 to 24 V DC mains adapters or phantom power

Standard active DI box. Can be operated with 9 V batteries or 48 V phantom power. High-impedance input; higher output level than with a passive DI box. Active circuitry allows for high input impedance ( 1 meg. ohm) and higher input sensitivity (typical difference between in and out -4 dB). Maximum output impedance with phantom power operation +10 dB. Output: transformer balanced. The special "floating ground" circuitry enables ground lift even during phantom power operation. Metal case 110 x 73 x 42 mm.

• Balancing and impedance matching for guitar, bass, keyboards & synthesizers
• Eliminates ground loop hum thanks to galvanic transformer isolation
• 4 independent DI boxes in a solid 19" housing (1U)
• Higher output level than a passive DI box
• THRU-output for passing the input signal
• Audio over Cat output (AES72 Type 5e) for forwarding all signals via a single Cat cable
• Pure and unaltered low-noise audio
• Handles even high-level inputs without distortion thanks to switchable -30dB pad
• Ground-lift switch for each output
• Power supply: 9V DC, center negative
• Engineered in Germany

• First-class Active Di-box
• Unbalanced XLR Input
• 3-way attenuator (-10, -20, -30dB)
• Switchable gain (12dB)
• Max. Output voltage +20 dB
• Soft ground lift

• Balancing and impedance matching for guitar, bass, keyboards & synthesizers
• Eliminates ground loop hum thanks to galvanic transformer isolation
• Extremely fail-safe, no power supply required
• THRU-output for passing the input signal to the amplifier
• THRU-output jack can also be used as second input to sum two input signals
• Pure and unaltered low-noise audio
• Handles even high-level inputs without distortion
• Switchable 30 dB pad for extremely high input levels (e.g. amplifier output)
• Solid casing made of aluminium and steel
• Incl. rewritable tour label for attachment onto the back of the wipper
• Engineered in Germany

• 19“ passive DI-Box
• 8 Channels
• Up to 16 Inputs
• Link Merge Function
• Flexible PAD: -10dB, -20dB, -30dB
• Transformer balanced and isolated outputs

• Balancing and impedance matching for guitar/bass/keyboard synthesisers
• Two-channel model for stereo signals or two instruments
• Eliminates ground loop hum thanks to galvanic transformer isolation
• Extremely fail-safe, no power supply required
• Thru-out for routing input signals to amplifiers
• Pure and unaltered low-noise audio
• Handles even high-level inputs without distortion
• Switchable 30 dB pad for extremely high input levels (e.g. amplifier output)
• Solid casing made of aluminium and steel
• Incl. rewritable tour label for attachment onto the back of the elde
• Engineered in Germany

• Wide range of authentic tube amplifier tones
• Selectable amplifier styles, gain structure and mic position emulation
• Master drive, level, bass and treble controls
• Superior signal-to-noise ratio
• Ideal for direct recording
• Doubles as distortion pedal, practice amp and DI box
• Pure analogue device

Active 4-channel DI box. Each channel has a jack input with a parallel output for passing through the signal. An attenuation switch (-30 dB) allows either a line or loudspeaker signal to be connected.Active 4 x DI box, 19"" format. Technical specitications identicl to the PAN-02, however, the PAN-03 is built for mains operation. All connections and switches are located on the front panel, an additional parallel XLR output is located in back. 19 inch rack-mount format, 1 rack space, 90 mm front to back.

• 2-channel balancing and impedance matching for guitar/bass/keyboard/synthesisers
• Eliminates ground loop hum thanks to galvanic transformer isolation 
• Neutral sound thanks to active input stages with high impedance
• Low noise floor 
• Individual outputs per channel plus mono sum output containing the signal of both channels
• THRU connection for passing the input signal to the amplifier 
• Handles even high-level inputs without distortion
• Switchable 30 dB pad for extremely high input levels (e.g. amplifier output)
• Power supply via 9V battery or 48V phantom power unit
• Road-ready aluminium and steel casing
• Incl. rewritable tour label for attachment on to the back of the inn
• Engineered in Germany

The PAN-04 consists of a housing containing the equivalent of two PAN-01s, making it a dual channel passive DI box. This „stereo"" configuration makes it ideally suited for use with certain keyboards and devices which have several outputs.ive DI box. Jack input with paralell THRU output, transformer balanced XLR output. Attenuable input sensitivity, can handle both line level and speaker level signals.

• Balancing and impedance matching for guitar/bass/keyboards/synthesisers
• Premium design: high headroom, low noise floor, ultra-efficient ground lift
• Prevents humming through galvanic transformer isolation with Mu-metal shielding
• Neutral sound thanks to active input stages with high impedance
• THRU connection for passing the input signal to the amplifier 
• Handles even very high-level inputs without distortion
• Variable pre-attenuation for high-level inputs plus a boost for weak signals
• Power supply via 9V battery or 48V phantom power unit
• Road-ready casing made of aluminium and steel plate
• Incl. rewritable tour label for attachment on to the back of the mosel
• Engineered in Germany