Drum Cases & Bags

ATA-Style PE drum hardcase, Riveted with padded lining Learn More

Gator Cases provides you with the products that protect what's important to you This is the Gator GP-DRUMCART A part of their Protechtor Percussion - Drum Accessory Bags Range It is a Drum Hardware Bag w/ Steel Frame & 100 Pound Capacity In-Line Wheels 600-Denier Nylon Drum Hardware Bag with 25mm Steel Construction Features include - 100 Pound Capacity in Line-Style Wheels, Exterior accessory pockets, Bag section is removable, and #10 Zippers

Learn More

• The 40" hardware case has HD Wheels with bearings running on a solid steel axle mounted at one end.
• 2 Side mounted Soft Grip lifting / carrying / pull handles
• 2 Over lid PVC covered strap lifting / carrying handles
• Ultimate protection from knocks, drops, bangs and skids
• Ultra tough single piece shell cases.
• Won't rot, won't rip, won't fall apart
• cases for long lasting protection.
• Stacking design for easier transport and storage.
• Ultra strong webbing and clips.
• ID badge to identify your own hardware case.
• More protection than a hardware softcase
• Cheaper than a hardware flight case

Learn More

The new, improved 1SKB-CV24W Rolling Cymbal Vault still retains the same industrial-strength Roto molded construction of the original version, but we've improved the wheels, upgraded the pull handle, and increased the depth to provide the best transport solution for as many as 8 cymbals, up to 24" in diameter. The 1SKB-CV24W includes a convenient storage pocket and four cymbal pads for protection so cymbals will travel without rubbing together. Molded with our famous "X" pattern, the 24 inch cymbal vault will stack with the SKB Roto-X Drum Cases and features a sturdy, high-tension slide release buckle with heavy-duty web straps for easy closure. *Fits traditionally shaped cymbals. China cymbals and flat ride cymbals will not fit. Learn More

• Case fitted with 2 x 75 wheels with sealed bearings
• Heavy duty steel axle, takes the strain
• Additional Soft Grip pulling handle
• PVC covered side handles on base and lid for easier two man handling
• Ultimate protection from knocks, drops, bangs and skids
• Ultra tough single piece shell cases.
• Won't rot, won't rip, won't fall apart - cases for long lasting protection.
• Stacking design for easier transport and storage.
• Soft grip carry handle
• Ultra strong webbing and clips.
• ID badge to identify your own drum case.
• Bespoke internal foam grip pads for a snug fit.
• Telescopic lid design to clamp your drum tight and secure.
• More protection than a Bass drum softcase
• Cheaper than a Bass drum flight case

Learn More

• NEW hinged lid Design.
• HN12CYM24 has a pull handle that slides into the back of the case, for compact storage. (previously called HNPROCYM)
• Recessed name and ID badges.
• Heavy duty steel axle that supports 2 x 75mm diameter heavy duty bearing wheels.
• Centre spindle (with protective plastic sleeve) that offers a much easier and flexible solution to locating and securing cymbals.
• Spindle locates in the lid when closed for additional support
• Will accommodate 12 cymbals up to 24" diameter.
• "Comfy Grip" carry handle
• Includes 11 cymbal divider foam discs.

Learn More

• Takes two Tom Toms in one case
• one less case to carry.
• Foam grip padded divider plate seperates drums to prevent damage.
• Complete with wheels and pull handle.
• Drums with Isolation / Suspension Mounting Systems* i.e. Rims, Optimounts, Gauger or Startcast are no problem for these cases, just choose the next size up. So for 10" & 12" Tom Tom drums with Suspension Mount use the HN12-13C 10" & 13" drum combo case.
• Ultimate protection from knocks, drops, bangs and skids
• Ultra tough single piece shell cases.
• Won't rot, won't rip, won't fall apart
• cases for long lasting protection.
• Stacking design for easier transport and storage.
• Soft grip carry handle
• Ultra strong webbing and clips.
• ID badge to identify your own drum case.
• Bespoke internal foam grip pads for a snug fit.
• Telescopic lid design to clamp your drum tight and secure.
• More protection than a Tom Tom drum softcase
• Cheaper than a Tom Tom drum flight case

Learn More

The Protection Racket 47" x 14" x 10" hardware bag wheels will comfortably house a full 5 piece kits worth of hardware. Comes with high quality replaceable polyurethane skateboard wheels. Learn More

ATA-Style PE drum hardcase, Riveted with padded lining Learn More

• Takes two Tom Toms in one case
• one less case to carry.
• Foam grip padded divider plate seperates drums to prevent damage.
• Complete with wheels and pull handle.
• Drums with Isolation / Suspension Mounting Systems* i.e. Rims, Optimounts, Gauger or Startcast are no problem for these cases, just choose the next size up. So for 10" & 12" Tom Tom drums with Suspension Mount use the HN12-13C 10" & 13" drum combo case.
• Ultimate protection from knocks, drops, bangs and skids
• Ultra tough single piece shell cases.
• Won't rot, won't rip, won't fall apart
• cases for long lasting protection.
• Stacking design for easier transport and storage.
• Soft grip carry handle
• Ultra strong webbing and clips.
• ID badge to identify your own drum case.
• Bespoke internal foam grip pads for a snug fit.
• Telescopic lid design to clamp your drum tight and secure.
• More protection than a Tom Tom drum softcase
• Cheaper than a Tom Tom drum flight case

Learn More

• Case fitted with 2 x 75 wheels with sealed bearings
• Heavy duty steel axle, takes the strain
• Additional Soft Grip pulling handle
• PVC covered side handles on base and lid for easier two man handling
• Ultimate protection from knocks, drops, bangs and skids
• Ultra tough single piece shell cases.
• Won't rot, won't rip, won't fall apart - cases for long lasting protection.
• Stacking design for easier transport and storage.
• Soft grip carry handle
• Ultra strong webbing and clips.
• ID badge to identify your own drum case.
• Bespoke internal foam grip pads for a snug fit.
• Telescopic lid design to clamp your drum tight and secure.
• More protection than a Bass drum softcase
• Cheaper than a Bass drum flight case

Learn More

• NEW hinged lid Design.
• New wheels and pull out handle.
• Recessed name and ID badges.
• Centre spindle (with protective plastic sleeve) that offers a much easier and
• flexible solution to locating and securing cymbals.
• Spindle locates in the lid when closed for additional support
• Will accommodate 9 cymbals up to 22" diameter.
• "Comfy Grip" carry handle
• Includes 8 cymbal divider foam inserts.

Learn More

The Protection Racket 38" x 14" x 10" hardware bag wheels will comfortably house a full 5 piece kits worth of hardware. Comes with retractable handle and high quality replaceable polyurethane skateboard wheels. Learn More

5-Piece Set of Padded Nylon Bags for Fusion Drum Set: 22″X18″, 10″X9″, 12″X10″, 16″X16″, 14″X5.5″ Learn More