Recording

• Functions as an extender for the iCON Pro Audio P1-M MIDI DAW controller
• 8x touch-sensitive motorised faders with 12-bit resolution
• Extremely hard wearing, durable and versatile
• Optional D4 OLED display shows channel name, control values, channel colours etc (DAW dependent)

Learn More

Premium 16-Input 2/2-Bus Mixer with XENYX Mic Preamps & Compressors, British EQs, 24-Bit Multi-FX Processor and USB/Audio Interface

Learn More

The Eris Pro 4 reference monitors employ a single point-source coaxial design for clear and accurate sound reproduction. This design provides superior phase alignment between components and delivers a wide sweet spot, precise stereo imaging, and symmetrical dispersion patterns - unique advantages for Dolby Atmos immersive rooms as well as stereo mix environments.

The Eris Pro 4 also delivers finely detailed transient response, and stunning dynamics that create a natural and less fatiguing listening experience. A 1-inch ultra-low mass, silk-dome tweeter ensures snappy, accurate transient reproduction, while a 4.5-inch woven-composite woofer offers tight, clear bass, with plenty of punch and no flab. A ported enclosure and 80 Watts of power allows the Eris Pro 4 to reach down to 55 Hz.

Acoustic tuning controls let you configure the Eris Pro 4 for your room and three-way Acoustic Space tuning can compensate for the effects of speaker placement against a wall or in a corner.

Flexible input options let you connect almost any line-level source, from mixers to audio interfaces and more. You'll have no problem hooking your Eris speakers up to virtually anything. Lastly, provisions for wall and ceiling mounts make it easy to integrate Eris Pro 4 monitors into any stereo or multi-channel system.

Sold individually.

Learn More

5-PIECE FUSION DRUM MICROPHONE PACKAGE – AFFORDABLE EXCELLENCE

The FP5 Drum Pack contains a combination of f2, f5, and f6 dynamic microphones. The f5 is tuned for snare drum and can be used as well for bongos, timbales, guitar cabinets, and acoustic instruments; the f2 is ideally suited for rack and floor toms, congas, djembe, bongos, timbales, brass, and woodwind instruments. The f6 dynamic microphone, with its extended bass response, is designed for kick drum, bass cabinets, cajon, and other low-frequency instruments.

Built to withstand the rigors of live stage applications, the Fusion Series mics are also excellent for rehearsal, school, house of worship, and a wide variety of home recording applications.

Learn More

• 49 velocity-sensitive keys
• Pitch bend and modulation wheels
• Assignable knobs and buttons
• Backlit LCD display

Learn More

The Line 6 MIDI Mobilizer II iOS MIDI interface builds on the extreme success of the original MIDI Mobilizer. Leave your laptop at home. With the huge selection of amazing CoreMIDI apps available for your iOS device, the MIDI Mobilizer II lets you perform or write music wherever you go. This pocket-sized MIDI interface doesn't require batteries or a power supply, and since there are many CoreMIDI apps that let you record Standard MIDI Files (.SMFs) on the go, the Line 6 MIDI Mobilizer II is an excellent songwriting tool. Learn More

Learn More

Learn More

PROFESSIONAL DYNAMIC INSTRUMENT MICROPHONE

The D6 dynamic instrument microphone is used for stage, studio, and broadcast applications. Designed with a Cardioid pickup pattern for isolation and feedback control, the D6 drum microphone is equipped with a VLM™ diaphragm for natural, accurate sound reproduction.

Lightweight, compact, and easy to position, the D6 Cardioid microphone is an excellent choice for miking instruments requiring extended low-frequency reproduction such as kick drums, large toms, and bass cabinets. The D6’s transformerless design, low impedance, and balanced output allow for interference-free performance.

Designed, machined, assembled, and tested by Audix in the USA.

Learn More

• Captures snare drum's true impact, body, and timbre
• Rejects up to 28dB of off-axis sounds for clear, mix-ready sonics
• Optimal phase coherence straight out of the microphone
• Replaces traditional multi-mic setup for snare drums

Learn More

The RH-200S headphones offer the clarity, sonic accuracy, and comfort needed for mixing and silent practice. Learn More

The RØDE M3 is a highly versatile end-address condenser microphone, designed to be completely at home in the studio, on stage or on location. It is equally suitable as an instrument microphone for guitars, drums and percussion or even vocals.

Learn More

MATCHED PAIR OF SCX25A LARGE DIAPHRAGM CONDENSERS

When you need accurate stereo microphones that are synced with each other, the SCX25AMP Matched Pair is the perfect set. Featuring two matched SCX25A microphones, you can rely on these microphones for any stereo field recording you can think of.

The SCX25A is a professional studio condenser microphone with an elegant design and a patented capsule suspension system. Uniquely shock-mounted within an intricate machined brass ring, the capsule is completely isolated from the mic body and electronics. By successfully minimizing acoustic reflections and diffractions, the SCX25A delivers a pure, open-air sound with exceptional detail and realism.

The SCX25A is consistent when responding to on and off-axis signals. This mic exhibits outstanding phase coherence and minimal proximity effect. With a wide Cardioid polar pattern, the SCX25A enables the sound engineer to blend the sound of the instrument or vocal with the sound of the room. The SCX25A large diaphragm microphone will handle SPLs in excess of 135 dB and provides up to 20 dB of ambient noise rejection.

Affectionately referred to as “The Lollipop,” The SCX25A Cardioid studio condenser microphone is perfectly suited to capture the sound of acoustic instruments such as pianos, guitars, vibes, woodwinds, brass, percussion toys, drums, orchestra, and symphony sections.

Learn More

PROFESSIONAL DYNAMIC INSTRUMENT MICROPHONE

With a Wide Frequency response of 40 Hz – 18 kHz and the ability to handle SPLs in excess of 144 dB, the D4 dynamic instrument microphone is an excellent choice for miking instruments requiring precise, low-frequency reproduction such as large rack toms, floor toms, cajon, djembe, tympani, leslie bottom, bass flute, saxophone and baritone saxophone, trombone, acoustic bass, bass cabinets, and small kick drums.

The D4 is lightweight, compact, and easy to position. Used for stage, studio, and broadcast applications, the D4 dynamic instrument microphone is designed with a Hypercardioid pickup pattern for isolation and feedback control. The D4 Hypercardioid is also equipped with a VLM™ diaphragm for natural accurate sound reproduction.

Learn More